Kitchen Cabinet Dimensions Australia

Kitchen Cabinet Dimensions Australia

Full height kitchen cabinets are available in standard depths 12 24 36 inches 30 61 92cm and the various standard widths.

Kitchen cabinet dimensions australia. This leaves 18 inches of space between your base cabinets and your wall cabinets after the countertops. All holes are predrilled for the cabinet. Floor cabinet widths generally increase by 100 or 150mm increments see fig.

The height of kitchen cabinets to the top of the bench should be between 850mm and 1000mm. The depth of the sink is around 200mm. All cabinets are 100 australian made.

Our cabinet height is 2330mm which is the tallest height that a fully assembled cabinet can be stood up beneath a 2400mm high ceiling as opposed to the shorter industry standard cabinets that usually get filled in with bulkheads. Once installed over your base cabinets the top of your wall cabinets will be at 84 inches 90 inches or 96 inches respectively. For height you have the option of 30 inches 36 inches or 42 inches.

The width of floor cabinets usually increase in multiples of 150mm i e. The maximum door width for a base cabinet is 600mm. Height will vary by manufacturer.

If you wish to plan your kitchen sink with a single bowl allow for a length of 550mm and a width of around 500mm. All cabinets are screw construction. The height of kickboards beneath the bottom of the cabinets should ideally be between 100mm and 200mm.

Take into account any cornice detail you wish to include on top of your full height cabinets when specifying the height. All backs are solid 16mm hmr. Standard dimensions for stock or diy base floor cabinets are 720mm high by 560mm deep without the door.

300mm 450mm 600mm 750mm 900mm 1050mm 1200mm. Australian made 16mm hmr partical board. For a double sink allow for a length of around 800mm and a width of 480mm plus drainage area on the benchtop.